Nitrous Outlet Chrysler 6.4 85mm EFI Hemi Hardline Intake Plate System (10 lb. Bottle)

by Nitrous Outlet

Product #: 00-10139-10


  • Flow Up To 400 HP
  • 400+HP Solenoids
  • High Flow Billet Aluminum Nitrous Plate
  • Fits 6.4L 85mm Hemi Intakes
  • All Hardware, Electrical and Jetting Included
  • E85 Compatible With Different Jetting
  • Includes Jetting For 50-100-150-200 HP
  • Includes 10 lb. Bottle

Gain up to 400 HP. This wet nitrous plate system comes out of the box ready to spray up to 200 HP but is capable flowing up to 400 HP with additional jetting.

Superior Atomization. This injection plate has 6 specially designed nitrous and fuel discharge ports that completely saturate the air intake charge for the best atomized mixture possible. For higher horsepower levels proper distribution into the air stream is critical for equal cylinder to cylinder distribution.

Wet Nitrous Plate. This system includes a billet aluminum plate to fit 6.4L Hemi intakes with an 85mm throttle body and is capable of flowing up to 400 HP of nitrous. Each billet plate has a black anodized finish with laser etched logo and fuel/nitrous labels.

Vehicle Specific. The Nitrous Outlet 6.4L Hemi Specific Nitrous system is the safest, best fitting, and most tuner friendly system available.This system is designed specifically for the 6.4 Hemi platform, including vehicle specific solenoid brackets, pre-bent hardline, and application specific hardware for the best fitment and cleanest install on the market.

Wide Open Throttle Activation. This system includes a wide open throttle (WOT) switch that only allows the system to be activated when the motor is at full throttle. This safety feature will prevent engine damage.

Complete System. This system includes all of the necessary component, hard lines, gasket, jetting, hardware and wiring to install a wet nitrous plate system capable of adding 200 HP to your Challenger, Charger, SRT-8 Jeep, and Chrysler 300C

Application. This system is specifically designed to fit vehicles like the Jeep SRT-8, Chrysler 300 SRT-8 with the 6.4L Hemi intake and 85mm throttle body.

Additional Information


SKU 00-10139
Number of Stages Single Stage
Max Flow (Per Stage) 400
Dry/Wet Wet
Number of Solenoids 2
Nitrous Solenoid Size .122 Orifice
Fuel Solenoid Size .177 Orifice
Relay and Harness Included? Yes
Fuel Adapter Fitting Included? Yes
Included Jetting (in Horsepower) 50-100-150-200
Fuel Pressure 55 PSI
Single Or Dual Stage Single Stage
Type Of Fuel Rail Stock Fuel Rails
Solenoid Bracket(s) Vehicle Specific
Main Feed Line Size 6AN
Hard or Soft Line (From Solenoids) Hard Line
Vehicle Make Mopar
Vehicle Model Challenger, Charger, LX/300C, SRT-8 Jeep
Vehicle Year 2012, 2013, 2014, 2015, 2016, 2017

Installation Instructions


You recently viewed

Clear recently viewed