Nitrous Outlet Chrysler 5.7/6.1 85mm EFI Hemi Plate System (15 lb. Bottle)

by Nitrous Outlet

Product #: 00-10131-15


  • Flow Up To 400 HP
  • 400+HP Solenoids
  • High Flow Billet Aluminum Nitrous Plate
  • Fits 6.1 85mm Hemi Intake
  • Chrysler Fuel Rail Adapter
  • All Hardware, Electrical, and Jetting Included
  • E85 Compatible with different jetting
  • Includes Jetting for 50-100-150-200 HP
  • Includes 15 lb. Bottle

Gain up to 400 HP. This wet nitrous plate system comes out of the box ready to spray up to 200 HP but is capable flowing up to 400 HP with additional jetting.

Superior Atomization. This injection plate has 6 specially designed nitrous and fuel discharge ports that completely saturate the air intake charge with the best atomized mixture possible. For higher horsepower levels proper distribution into the air stream is critical for equal cylinder to cylinder distribution.

Race Proven. Nitrous Outlet 5.7/6.1 Hemi plate systems are the only plate systems available that are capable of safely delivering a precise atomized mixture of nitrous and fuel into the intake plenum equally. This system includes everything needed for installation and will fit on any LX based application including Dodge Challenger, Charger, Magnum, and Chrysler 300C.

Wet Nitrous Plate. This system includes a billet aluminum plate to fit 6.1L Hemi intakes with an 85mm throttle body and is capable of flowing up to 400 HP of nitrous. Each billet plate has a black anodized finish with laser etched logo and fuel/nitrous labels.

Wide Open Throttle Activation. This system includes a wide open throttle (WOT) switch that only allows the system to be activated when the motor is at full throttle. This safety feature will prevent engine damage.

Complete System. This system includes all of the necessary components, jetting, hardware, chrysler fuel rail adapter, and wiring to install a wet nitrous system capable of adding 200 HP to your vehicle.

Application. This system is specifically designed to fit the 6.1L Hemi intake with 85mm throttle body including the Dodge Ram, SRT-8 Jeep, Challenger, Magnum, and LX/300C.

Additional Information

SKU 00-10131
Number of Stages Single Stage
Max Flow (Per Stage) 400
Dry/Wet Wet
Number of Solenoids 2
Nitrous Solenoid Size .122 Orifice
Fuel Solenoid Size .177 Orifice
Relay and Harness Included? Yes
Fuel Adapter Fitting Included? Yes
Included Jetting (in Horsepower) 50-100-150-200
Fuel Pressure 45-55 PSI
Single Or Dual Stage Single Stage
Type Of Fuel Rail Stock Fuel Rails
Solenoid Bracket(s) Universal
Main Feed Line Size 6AN
Hard or Soft Line (From Solenoids) Soft Line
Vehicle Make Mopar
Vehicle Model Challenger, Dodge Truck, LX/300C, SRT-8 Jeep
Vehicle Year Universal

Installation Instructions


You recently viewed

Clear recently viewed